Review





Similar Products

97
Illumina Inc illumina dna prep kit
Illumina Dna Prep Kit, supplied by Illumina Inc, used in various techniques. Bioz Stars score: 97/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dna+flex+library+prep+kit/Nextera+DNA+Flex+Library+Prep/pmc13769278-60-26-26
Average 97 stars, based on 1 article reviews
illumina dna prep kit - by Bioz Stars, 2026-11
97/100 stars
  Buy from Supplier

97
Illumina Inc nextera dna flex library prep kit
( a ) Schematics of Cassette START Cassette END of ACE, together with designs of the pAra-Trans conjugation helper plasmid and the pAra-CAST transposition effector plasmid. Cassette START contains sacB (−1) and cm R (+1) genes encoding sucrose susceptibility and chloramphenicol resistance, respectively, in addition to a RK24 origin of transfer (oriT) and the right end (RE) of the Tn6677 transposable element. Cassette END contains pheS (−2) and hygro R (+2) genes encoding p-chloro-phenylalanine susceptibility and hygromycin resistance, respectively, in addition to a gfp encoding “Green Lantern” green fluorescent protein, a RK24 oriT and the left end (LE) of the Tn6677 transposable element. pAra-Trans encodes RK24 conjugation machinery under control of an arabinose inducible promoter (P Ara ) on an apra R (+3) single copy bacterial artificial chromosome (BAC) while the pAra-CAST encodes the RNA-guided Tn6677 transposase under an arabinose inducible promoter (P Ara ) on a spec R (+4) CDF replication backbone. The Tn6677 crRNA is expressed under a separate constitutive promoter. Abbreviated schematics of each component is shown within paratheses next to each detailed representation. (b ) Overview of the ACE process. The workflow starts with arbitrary cell X with genome X and cell Y with genome Y (i). Cassette START and Cassette END are sequentially integrated into genome X to specify the donor transfer window (ii). Engineered cell X is then transformed with pAra-Trans to be fully primed as the donor strain (iii). Cell Y requires no genomic modification and is transformed with pAra-CAST to be primed as the recipient strain (iv). For an ACE transfer experiment, donor and recipient strains are induced with arabinose and mixed in a defined ratio to allow for transfer of the oriT-flanked genomic <t>DNA</t> from cell X to cell Y . Transfer of genome X in the form of single-stranded DNA (ssDNA) initiates at the oriT in Cassette START and terminates at the oriT in Cassette END (v). Notably, transfer could also initiate at the oriT in Cassette END and terminate at the oriT in Cassette START (not depicted). The donated ssDNA recircularizes in cell Y using the traI nicking region for circularization and is converted into double-stranded DNA (dsDNA) by replication of the other strand. This circular dsDNA carries the RE and LE for recognition by the CAST complex, which integrates the dsDNA into genome Y in a crRNA dependent manner (vi). Plating on spectinomycin, hygromycin and sucrose enables selection for the gain and maintenance of (+2) and (+4), respectively, and the loss or absence of (−1), enabling the selection of successful post-ACE recipient cells and elimination of donor cell X (shown in background of vi) and virgin recipient cell without the required selection markers combination. Two integration outcomes (RL and LR integrants) in cell Y are possible due to the bidirectional transposition properties of CASTs (vii).
Nextera Dna Flex Library Prep Kit, supplied by Illumina Inc, used in various techniques. Bioz Stars score: 97/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dna+flex+library+prep+kit/Nextera+DNA+Flex+Library+Prep/bio_rxiv__64898__2026__11__04__764350-356-3-9
Average 97 stars, based on 1 article reviews
nextera dna flex library prep kit - by Bioz Stars, 2026-11
97/100 stars
  Buy from Supplier

97
Illumina Inc nextera xt flex illumina dna prep kit
( a ) Schematics of Cassette START Cassette END of ACE, together with designs of the pAra-Trans conjugation helper plasmid and the pAra-CAST transposition effector plasmid. Cassette START contains sacB (−1) and cm R (+1) genes encoding sucrose susceptibility and chloramphenicol resistance, respectively, in addition to a RK24 origin of transfer (oriT) and the right end (RE) of the Tn6677 transposable element. Cassette END contains pheS (−2) and hygro R (+2) genes encoding p-chloro-phenylalanine susceptibility and hygromycin resistance, respectively, in addition to a gfp encoding “Green Lantern” green fluorescent protein, a RK24 oriT and the left end (LE) of the Tn6677 transposable element. pAra-Trans encodes RK24 conjugation machinery under control of an arabinose inducible promoter (P Ara ) on an apra R (+3) single copy bacterial artificial chromosome (BAC) while the pAra-CAST encodes the RNA-guided Tn6677 transposase under an arabinose inducible promoter (P Ara ) on a spec R (+4) CDF replication backbone. The Tn6677 crRNA is expressed under a separate constitutive promoter. Abbreviated schematics of each component is shown within paratheses next to each detailed representation. (b ) Overview of the ACE process. The workflow starts with arbitrary cell X with genome X and cell Y with genome Y (i). Cassette START and Cassette END are sequentially integrated into genome X to specify the donor transfer window (ii). Engineered cell X is then transformed with pAra-Trans to be fully primed as the donor strain (iii). Cell Y requires no genomic modification and is transformed with pAra-CAST to be primed as the recipient strain (iv). For an ACE transfer experiment, donor and recipient strains are induced with arabinose and mixed in a defined ratio to allow for transfer of the oriT-flanked genomic <t>DNA</t> from cell X to cell Y . Transfer of genome X in the form of single-stranded DNA (ssDNA) initiates at the oriT in Cassette START and terminates at the oriT in Cassette END (v). Notably, transfer could also initiate at the oriT in Cassette END and terminate at the oriT in Cassette START (not depicted). The donated ssDNA recircularizes in cell Y using the traI nicking region for circularization and is converted into double-stranded DNA (dsDNA) by replication of the other strand. This circular dsDNA carries the RE and LE for recognition by the CAST complex, which integrates the dsDNA into genome Y in a crRNA dependent manner (vi). Plating on spectinomycin, hygromycin and sucrose enables selection for the gain and maintenance of (+2) and (+4), respectively, and the loss or absence of (−1), enabling the selection of successful post-ACE recipient cells and elimination of donor cell X (shown in background of vi) and virgin recipient cell without the required selection markers combination. Two integration outcomes (RL and LR integrants) in cell Y are possible due to the bidirectional transposition properties of CASTs (vii).
Nextera Xt Flex Illumina Dna Prep Kit, supplied by Illumina Inc, used in various techniques. Bioz Stars score: 97/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dna+flex+library+prep+kit/Nextera+DNA+Flex+Library+Prep/pm42986127-133-7-10
Average 97 stars, based on 1 article reviews
nextera xt flex illumina dna prep kit - by Bioz Stars, 2026-11
97/100 stars
  Buy from Supplier

97
Illumina Inc nextera flex dna library kit
( a ) Schematics of Cassette START Cassette END of ACE, together with designs of the pAra-Trans conjugation helper plasmid and the pAra-CAST transposition effector plasmid. Cassette START contains sacB (−1) and cm R (+1) genes encoding sucrose susceptibility and chloramphenicol resistance, respectively, in addition to a RK24 origin of transfer (oriT) and the right end (RE) of the Tn6677 transposable element. Cassette END contains pheS (−2) and hygro R (+2) genes encoding p-chloro-phenylalanine susceptibility and hygromycin resistance, respectively, in addition to a gfp encoding “Green Lantern” green fluorescent protein, a RK24 oriT and the left end (LE) of the Tn6677 transposable element. pAra-Trans encodes RK24 conjugation machinery under control of an arabinose inducible promoter (P Ara ) on an apra R (+3) single copy bacterial artificial chromosome (BAC) while the pAra-CAST encodes the RNA-guided Tn6677 transposase under an arabinose inducible promoter (P Ara ) on a spec R (+4) CDF replication backbone. The Tn6677 crRNA is expressed under a separate constitutive promoter. Abbreviated schematics of each component is shown within paratheses next to each detailed representation. (b ) Overview of the ACE process. The workflow starts with arbitrary cell X with genome X and cell Y with genome Y (i). Cassette START and Cassette END are sequentially integrated into genome X to specify the donor transfer window (ii). Engineered cell X is then transformed with pAra-Trans to be fully primed as the donor strain (iii). Cell Y requires no genomic modification and is transformed with pAra-CAST to be primed as the recipient strain (iv). For an ACE transfer experiment, donor and recipient strains are induced with arabinose and mixed in a defined ratio to allow for transfer of the oriT-flanked genomic <t>DNA</t> from cell X to cell Y . Transfer of genome X in the form of single-stranded DNA (ssDNA) initiates at the oriT in Cassette START and terminates at the oriT in Cassette END (v). Notably, transfer could also initiate at the oriT in Cassette END and terminate at the oriT in Cassette START (not depicted). The donated ssDNA recircularizes in cell Y using the traI nicking region for circularization and is converted into double-stranded DNA (dsDNA) by replication of the other strand. This circular dsDNA carries the RE and LE for recognition by the CAST complex, which integrates the dsDNA into genome Y in a crRNA dependent manner (vi). Plating on spectinomycin, hygromycin and sucrose enables selection for the gain and maintenance of (+2) and (+4), respectively, and the loss or absence of (−1), enabling the selection of successful post-ACE recipient cells and elimination of donor cell X (shown in background of vi) and virgin recipient cell without the required selection markers combination. Two integration outcomes (RL and LR integrants) in cell Y are possible due to the bidirectional transposition properties of CASTs (vii).
Nextera Flex Dna Library Kit, supplied by Illumina Inc, used in various techniques. Bioz Stars score: 97/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dna+flex+library+prep+kit/Nextera+DNA+Flex+Library+Prep/pm42961129-374-6-15
Average 97 stars, based on 1 article reviews
nextera flex dna library kit - by Bioz Stars, 2026-11
97/100 stars
  Buy from Supplier

97
Illumina Inc dna prep library preparation kit
( a ) Schematics of Cassette START Cassette END of ACE, together with designs of the pAra-Trans conjugation helper plasmid and the pAra-CAST transposition effector plasmid. Cassette START contains sacB (−1) and cm R (+1) genes encoding sucrose susceptibility and chloramphenicol resistance, respectively, in addition to a RK24 origin of transfer (oriT) and the right end (RE) of the Tn6677 transposable element. Cassette END contains pheS (−2) and hygro R (+2) genes encoding p-chloro-phenylalanine susceptibility and hygromycin resistance, respectively, in addition to a gfp encoding “Green Lantern” green fluorescent protein, a RK24 oriT and the left end (LE) of the Tn6677 transposable element. pAra-Trans encodes RK24 conjugation machinery under control of an arabinose inducible promoter (P Ara ) on an apra R (+3) single copy bacterial artificial chromosome (BAC) while the pAra-CAST encodes the RNA-guided Tn6677 transposase under an arabinose inducible promoter (P Ara ) on a spec R (+4) CDF replication backbone. The Tn6677 crRNA is expressed under a separate constitutive promoter. Abbreviated schematics of each component is shown within paratheses next to each detailed representation. (b ) Overview of the ACE process. The workflow starts with arbitrary cell X with genome X and cell Y with genome Y (i). Cassette START and Cassette END are sequentially integrated into genome X to specify the donor transfer window (ii). Engineered cell X is then transformed with pAra-Trans to be fully primed as the donor strain (iii). Cell Y requires no genomic modification and is transformed with pAra-CAST to be primed as the recipient strain (iv). For an ACE transfer experiment, donor and recipient strains are induced with arabinose and mixed in a defined ratio to allow for transfer of the oriT-flanked genomic <t>DNA</t> from cell X to cell Y . Transfer of genome X in the form of single-stranded DNA (ssDNA) initiates at the oriT in Cassette START and terminates at the oriT in Cassette END (v). Notably, transfer could also initiate at the oriT in Cassette END and terminate at the oriT in Cassette START (not depicted). The donated ssDNA recircularizes in cell Y using the traI nicking region for circularization and is converted into double-stranded DNA (dsDNA) by replication of the other strand. This circular dsDNA carries the RE and LE for recognition by the CAST complex, which integrates the dsDNA into genome Y in a crRNA dependent manner (vi). Plating on spectinomycin, hygromycin and sucrose enables selection for the gain and maintenance of (+2) and (+4), respectively, and the loss or absence of (−1), enabling the selection of successful post-ACE recipient cells and elimination of donor cell X (shown in background of vi) and virgin recipient cell without the required selection markers combination. Two integration outcomes (RL and LR integrants) in cell Y are possible due to the bidirectional transposition properties of CASTs (vii).
Dna Prep Library Preparation Kit, supplied by Illumina Inc, used in various techniques. Bioz Stars score: 97/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dna+flex+library+prep+kit/Nextera+DNA+Flex+Library+Prep/pmc13695289-75-11-10
Average 97 stars, based on 1 article reviews
dna prep library preparation kit - by Bioz Stars, 2026-11
97/100 stars
  Buy from Supplier

Image Search Results


( a ) Schematics of Cassette START Cassette END of ACE, together with designs of the pAra-Trans conjugation helper plasmid and the pAra-CAST transposition effector plasmid. Cassette START contains sacB (−1) and cm R (+1) genes encoding sucrose susceptibility and chloramphenicol resistance, respectively, in addition to a RK24 origin of transfer (oriT) and the right end (RE) of the Tn6677 transposable element. Cassette END contains pheS (−2) and hygro R (+2) genes encoding p-chloro-phenylalanine susceptibility and hygromycin resistance, respectively, in addition to a gfp encoding “Green Lantern” green fluorescent protein, a RK24 oriT and the left end (LE) of the Tn6677 transposable element. pAra-Trans encodes RK24 conjugation machinery under control of an arabinose inducible promoter (P Ara ) on an apra R (+3) single copy bacterial artificial chromosome (BAC) while the pAra-CAST encodes the RNA-guided Tn6677 transposase under an arabinose inducible promoter (P Ara ) on a spec R (+4) CDF replication backbone. The Tn6677 crRNA is expressed under a separate constitutive promoter. Abbreviated schematics of each component is shown within paratheses next to each detailed representation. (b ) Overview of the ACE process. The workflow starts with arbitrary cell X with genome X and cell Y with genome Y (i). Cassette START and Cassette END are sequentially integrated into genome X to specify the donor transfer window (ii). Engineered cell X is then transformed with pAra-Trans to be fully primed as the donor strain (iii). Cell Y requires no genomic modification and is transformed with pAra-CAST to be primed as the recipient strain (iv). For an ACE transfer experiment, donor and recipient strains are induced with arabinose and mixed in a defined ratio to allow for transfer of the oriT-flanked genomic DNA from cell X to cell Y . Transfer of genome X in the form of single-stranded DNA (ssDNA) initiates at the oriT in Cassette START and terminates at the oriT in Cassette END (v). Notably, transfer could also initiate at the oriT in Cassette END and terminate at the oriT in Cassette START (not depicted). The donated ssDNA recircularizes in cell Y using the traI nicking region for circularization and is converted into double-stranded DNA (dsDNA) by replication of the other strand. This circular dsDNA carries the RE and LE for recognition by the CAST complex, which integrates the dsDNA into genome Y in a crRNA dependent manner (vi). Plating on spectinomycin, hygromycin and sucrose enables selection for the gain and maintenance of (+2) and (+4), respectively, and the loss or absence of (−1), enabling the selection of successful post-ACE recipient cells and elimination of donor cell X (shown in background of vi) and virgin recipient cell without the required selection markers combination. Two integration outcomes (RL and LR integrants) in cell Y are possible due to the bidirectional transposition properties of CASTs (vii).

Journal: bioRxiv

Article Title: Creation of genomic chimeras via megabase scale genome expansion

doi: 10.64898/2026.11.04.764350

Figure Lengend Snippet: ( a ) Schematics of Cassette START Cassette END of ACE, together with designs of the pAra-Trans conjugation helper plasmid and the pAra-CAST transposition effector plasmid. Cassette START contains sacB (−1) and cm R (+1) genes encoding sucrose susceptibility and chloramphenicol resistance, respectively, in addition to a RK24 origin of transfer (oriT) and the right end (RE) of the Tn6677 transposable element. Cassette END contains pheS (−2) and hygro R (+2) genes encoding p-chloro-phenylalanine susceptibility and hygromycin resistance, respectively, in addition to a gfp encoding “Green Lantern” green fluorescent protein, a RK24 oriT and the left end (LE) of the Tn6677 transposable element. pAra-Trans encodes RK24 conjugation machinery under control of an arabinose inducible promoter (P Ara ) on an apra R (+3) single copy bacterial artificial chromosome (BAC) while the pAra-CAST encodes the RNA-guided Tn6677 transposase under an arabinose inducible promoter (P Ara ) on a spec R (+4) CDF replication backbone. The Tn6677 crRNA is expressed under a separate constitutive promoter. Abbreviated schematics of each component is shown within paratheses next to each detailed representation. (b ) Overview of the ACE process. The workflow starts with arbitrary cell X with genome X and cell Y with genome Y (i). Cassette START and Cassette END are sequentially integrated into genome X to specify the donor transfer window (ii). Engineered cell X is then transformed with pAra-Trans to be fully primed as the donor strain (iii). Cell Y requires no genomic modification and is transformed with pAra-CAST to be primed as the recipient strain (iv). For an ACE transfer experiment, donor and recipient strains are induced with arabinose and mixed in a defined ratio to allow for transfer of the oriT-flanked genomic DNA from cell X to cell Y . Transfer of genome X in the form of single-stranded DNA (ssDNA) initiates at the oriT in Cassette START and terminates at the oriT in Cassette END (v). Notably, transfer could also initiate at the oriT in Cassette END and terminate at the oriT in Cassette START (not depicted). The donated ssDNA recircularizes in cell Y using the traI nicking region for circularization and is converted into double-stranded DNA (dsDNA) by replication of the other strand. This circular dsDNA carries the RE and LE for recognition by the CAST complex, which integrates the dsDNA into genome Y in a crRNA dependent manner (vi). Plating on spectinomycin, hygromycin and sucrose enables selection for the gain and maintenance of (+2) and (+4), respectively, and the loss or absence of (−1), enabling the selection of successful post-ACE recipient cells and elimination of donor cell X (shown in background of vi) and virgin recipient cell without the required selection markers combination. Two integration outcomes (RL and LR integrants) in cell Y are possible due to the bidirectional transposition properties of CASTs (vii).

Article Snippet: For library preparation, Nextera DNA Flex Library Prep Kit (Illumina) was used per manufacturer instructions to tag, barcode, amplify and add index primers (i5 and i7) to the library.

Techniques: Conjugation Assay, Plasmid Preparation, Control, Transformation Assay, Modification, Selection

( a ) Phylogenetic tree within the class of Gammaproteobacteria , specifically between Escherichia and Shigella genera and between the Enterobacteriales and Vibrionales orders. Cross-genus DNA transfer from Shigella to Escherichia is shown by the blue arrow. Cross-order DNA transfer from Escherichia to Vibrio is depicted by the purple arrow. The Pseudomonadales order is also bolded with green to emphasize its successful use as a recipient in an ACE experiment. (b ) Phase contrast confocal microscopy of synthesized cross-strain and cross-species genome chimeras. Scale bar is provided in the first image of S. flexneri . Strains and chimeras are color-coded according to the following: blue for S. flexneri , pink for Syn61 and black for E. coli DH10B. (c ) Diagram of ∼1-Mb S. flexneri donor fragment transfer to E. coli DH10B and E. coli MDS42. The S. flexneri genome is depicted by the blue circle and the E. coli genomes are depicted by the gray circle. Sizes (in Mb) of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region is centered around the dif site of S. flexneri and is represented by the dark blue portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the blue arrow. The dif site of E. coli is given by the gray rectangle, which is targeted by the CAST by the TS crRNA, shown as a gray triangle. The outcome chimeric genome (5.6 Mb for DH10B -S. flexneri and 4.9 Mb for MDS42 -S. flexneri ) is represented as an integration of the dark blue segment of the S. flexneri genome into the gray E. coli genome at the dif site. (d ) Genome-wide read coverages (in RPGC) for the E. coli DH10B + 1-Mb S. flexneri (top) and E coli MDS42 + 1-Mb S. flexneri (bottom) genomic chimeric strain. S. flexneri genomic segments are shaded in blue, and homologous E. coli genomic segments are shaded in dark gray. Non-redundant sections of the E. coli genome are in lighter grays. Location of the TS dif target is given by the gray triangle. Read fraction mapping to the S. flexneri segment and the homologous DH10B segment is set above the coverage plot. Read fractions share the same color coding as the coverage plot. (e ) Diagram of 1-Mb E. coli MDS42 donor fragment transfer to V. natriegens . The MDS42 genome is depicted by the gray circle and the V. natriegens genomes are depicted by the purple circles, with chromosome 1 in dark purple and chromosome 2 in light purple. Sizes (in Mb) of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region is centered around the dif site of MDS42 and is represented by the dark gray portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the gray arrow. The dif site of V. natriegens chromosome 1 is given by the dark purple rectangle, which is targeted by the CAST by the TS C1 crRNA, shown as a purple triangle. The dif site of V. natriegens chromosome 2 is likewise represented by a purple rectangle targeted by TS C2 shown as a purple triangle. The outcome chimeric genomes (6.1 Mb) are represented as an integration of the dark gray segment of the MDS42 genome into either chromosome 1 or chromosome 2 of the V. natriegens genome at their respective dif sites. (f ) Genome-wide read coverage (in RPGC) for the V. natriegens chr.1 + 1-Mb MDS42 and V. natriegens chr.2 + 1-Mb MDS42 chimeric genome strain. MDS42 genomic segments are shaded in gray, V. natriegens genomic segments are shaded in purple. The sizes and spans of each section of the chimeras are given by dotted lines of the appropriate color. The genomic locations of TS C1 and TS C2 are given by dark purple and purple triangles. (g ) Diagram of the stepwise ACE synthesis of a tripartite genomic hybrid (trimera) between E. coli DH10B, E. coli Syn61 and S. flexneri . Sizes (in Mb) of transferred region, recipient genomes and chimeric/trimeric genomes are given in the schematic. In the first step, the creation of E. coli DH10B + 2-Mb Syn61 seg. 1 is as previously described in 4b . with the exception of the recipient in this case being the wild-type DH10B without Δdif::lux with a TS crRNA. The ∼1-Mb S. flexneri donor fragment, as previously seen in c . is then integrated in the second step into E. coli DH10B + 2-Mb Syn61 at the dif site of the chimera as depicted with the pink rectangle with the TS’ crRNA, represented by a pink triangle. The outcome trimeric genome (7.4 Mb for DH10B - Syn61 -S. flexneri ) is represented as an integration of the dark blue segment of the S. flexneri genome into the DH10B + 2 Mb Syn61 genome at the dif site. (h ) As in d . but the genome-wide read coverage (in RPGC) for the E. coli DH10B + 2-Mb Syn61 chimeric strain and E. coli DH10B + 2 Mb Syn61 + 1 Mb S. flexneri trimeric genome strain. S. flexneri genomic segments are shaded in blue, Syn61 genomic segments are shaded in pink and DH10B genomic segments are shaded in gray. The sizes and spans of each section of the trimera are given by dotted lines of the appropriate color. The genomic locations of TS and TS’ are given by gray and pink triangles.

Journal: bioRxiv

Article Title: Creation of genomic chimeras via megabase scale genome expansion

doi: 10.64898/2026.11.04.764350

Figure Lengend Snippet: ( a ) Phylogenetic tree within the class of Gammaproteobacteria , specifically between Escherichia and Shigella genera and between the Enterobacteriales and Vibrionales orders. Cross-genus DNA transfer from Shigella to Escherichia is shown by the blue arrow. Cross-order DNA transfer from Escherichia to Vibrio is depicted by the purple arrow. The Pseudomonadales order is also bolded with green to emphasize its successful use as a recipient in an ACE experiment. (b ) Phase contrast confocal microscopy of synthesized cross-strain and cross-species genome chimeras. Scale bar is provided in the first image of S. flexneri . Strains and chimeras are color-coded according to the following: blue for S. flexneri , pink for Syn61 and black for E. coli DH10B. (c ) Diagram of ∼1-Mb S. flexneri donor fragment transfer to E. coli DH10B and E. coli MDS42. The S. flexneri genome is depicted by the blue circle and the E. coli genomes are depicted by the gray circle. Sizes (in Mb) of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region is centered around the dif site of S. flexneri and is represented by the dark blue portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the blue arrow. The dif site of E. coli is given by the gray rectangle, which is targeted by the CAST by the TS crRNA, shown as a gray triangle. The outcome chimeric genome (5.6 Mb for DH10B -S. flexneri and 4.9 Mb for MDS42 -S. flexneri ) is represented as an integration of the dark blue segment of the S. flexneri genome into the gray E. coli genome at the dif site. (d ) Genome-wide read coverages (in RPGC) for the E. coli DH10B + 1-Mb S. flexneri (top) and E coli MDS42 + 1-Mb S. flexneri (bottom) genomic chimeric strain. S. flexneri genomic segments are shaded in blue, and homologous E. coli genomic segments are shaded in dark gray. Non-redundant sections of the E. coli genome are in lighter grays. Location of the TS dif target is given by the gray triangle. Read fraction mapping to the S. flexneri segment and the homologous DH10B segment is set above the coverage plot. Read fractions share the same color coding as the coverage plot. (e ) Diagram of 1-Mb E. coli MDS42 donor fragment transfer to V. natriegens . The MDS42 genome is depicted by the gray circle and the V. natriegens genomes are depicted by the purple circles, with chromosome 1 in dark purple and chromosome 2 in light purple. Sizes (in Mb) of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region is centered around the dif site of MDS42 and is represented by the dark gray portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the gray arrow. The dif site of V. natriegens chromosome 1 is given by the dark purple rectangle, which is targeted by the CAST by the TS C1 crRNA, shown as a purple triangle. The dif site of V. natriegens chromosome 2 is likewise represented by a purple rectangle targeted by TS C2 shown as a purple triangle. The outcome chimeric genomes (6.1 Mb) are represented as an integration of the dark gray segment of the MDS42 genome into either chromosome 1 or chromosome 2 of the V. natriegens genome at their respective dif sites. (f ) Genome-wide read coverage (in RPGC) for the V. natriegens chr.1 + 1-Mb MDS42 and V. natriegens chr.2 + 1-Mb MDS42 chimeric genome strain. MDS42 genomic segments are shaded in gray, V. natriegens genomic segments are shaded in purple. The sizes and spans of each section of the chimeras are given by dotted lines of the appropriate color. The genomic locations of TS C1 and TS C2 are given by dark purple and purple triangles. (g ) Diagram of the stepwise ACE synthesis of a tripartite genomic hybrid (trimera) between E. coli DH10B, E. coli Syn61 and S. flexneri . Sizes (in Mb) of transferred region, recipient genomes and chimeric/trimeric genomes are given in the schematic. In the first step, the creation of E. coli DH10B + 2-Mb Syn61 seg. 1 is as previously described in 4b . with the exception of the recipient in this case being the wild-type DH10B without Δdif::lux with a TS crRNA. The ∼1-Mb S. flexneri donor fragment, as previously seen in c . is then integrated in the second step into E. coli DH10B + 2-Mb Syn61 at the dif site of the chimera as depicted with the pink rectangle with the TS’ crRNA, represented by a pink triangle. The outcome trimeric genome (7.4 Mb for DH10B - Syn61 -S. flexneri ) is represented as an integration of the dark blue segment of the S. flexneri genome into the DH10B + 2 Mb Syn61 genome at the dif site. (h ) As in d . but the genome-wide read coverage (in RPGC) for the E. coli DH10B + 2-Mb Syn61 chimeric strain and E. coli DH10B + 2 Mb Syn61 + 1 Mb S. flexneri trimeric genome strain. S. flexneri genomic segments are shaded in blue, Syn61 genomic segments are shaded in pink and DH10B genomic segments are shaded in gray. The sizes and spans of each section of the trimera are given by dotted lines of the appropriate color. The genomic locations of TS and TS’ are given by gray and pink triangles.

Article Snippet: For library preparation, Nextera DNA Flex Library Prep Kit (Illumina) was used per manufacturer instructions to tag, barcode, amplify and add index primers (i5 and i7) to the library.

Techniques: Phase Contrast, Confocal, Microscopy, Synthesized, Genome Wide

( a ) Tn-seq workflow; (1) Bacterial colonies formed by ACE transfer on selective agar plates are (2) scraped and collected for genomic DNA extraction. A subpopulation of the extracted DNA contains fragments carrying transposon ends (TEs), denoted in beige, as a hallmark of a conjugative CAST event. (3) DNA fragments are randomly tagged with adapters and fragmented (tagmented) using bead-linked transposomes using routine library preparation protocols to append 5’ and 3’ sequences for standard sequencing primer annealing (blue and green). (4) Indices, P5 and P7 adapters are then added using a custom PCR-based library amplification step that allows for enrichment of sequences containing TEs from the total population of tagmented DNA. Briefly, custom primers containing the P5 adapter sequence (pink) as well as an index sequence (purple) were designed to anneal to the RE of the transposon (beige) were paired with a standard primer containing a P7 adapter (orange) and an index sequence (dark purple) which anneals to the standard sequencing primer binding site (blue) in a low cycle PCR. (5) This TE-enriched sequencing library is then sequenced on a MiSeq using a custom sequencing primer that anneals to the RE. (b ) Genome-wide distribution of Tn-seq reads, measured in precent reads, from ACE transfer experiments of 10-kb, 50-kb and 100-kb Syn100 cargoes into TS1 (purple bars), TS2 (blue bars) and TS3 (pink bars). Locations of each target site are given by triangles of the appropriate color. Genome coordinates are plotted with the origin of replication ( oriC ) as the zeroth coordinate. (c ) Integration orientation for ACE transfer experiments of 10-kb, 50-kb and 100-kb Syn100 cargoes into TS1 (purple), TS2 (blue) and TS3 (pink) given in percent Tn-seq reads. RL integration is given in blue and LR integration is given in light blue. (d ) Genome-wide distribution of off-target Tn-seq reads for ACE transfer experiments of 100-kb Syn100 cargo into TS1 (purple circles), TS2 (blue circles) and TS3 (pink circles). Frequency of off-target integration is given as a read fraction normalized to the most frequent off-target integration position. The most frequent off-target integration position for each of the TS1-3 experiments is additionally labeled with the percent reads in the Tn-seq mapping to said position. Genome coordinates are plotted with the origin of replication ( oriC ) as the zeroth coordinate. (e ) Diagram illustrating the variants of the pAra-CAST plasmids used in 100-kb Syn100 cargo transfers and corresponding efficiency of ACE transfer with each variant, measured in GFP+ c.f.u. Data is shown as the mean ± s.d. for n = 3 biologically independent samples. (f ) Genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-crRNA NT . Frequency of integration is given as a read fraction normalized to the most frequent integration position. The most frequent integration position is additionally labeled with the percent reads in the Tn-seq mapping to said position. Genome coordinates are plotted with the origin of replication ( oriC ) as the zeroth coordinate. (g ) As in f but genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-ΔcrRNA. (h ) As in f but genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-Δcascade. (i ) As in f but genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-ΔQcascade.

Journal: bioRxiv

Article Title: Creation of genomic chimeras via megabase scale genome expansion

doi: 10.64898/2026.11.04.764350

Figure Lengend Snippet: ( a ) Tn-seq workflow; (1) Bacterial colonies formed by ACE transfer on selective agar plates are (2) scraped and collected for genomic DNA extraction. A subpopulation of the extracted DNA contains fragments carrying transposon ends (TEs), denoted in beige, as a hallmark of a conjugative CAST event. (3) DNA fragments are randomly tagged with adapters and fragmented (tagmented) using bead-linked transposomes using routine library preparation protocols to append 5’ and 3’ sequences for standard sequencing primer annealing (blue and green). (4) Indices, P5 and P7 adapters are then added using a custom PCR-based library amplification step that allows for enrichment of sequences containing TEs from the total population of tagmented DNA. Briefly, custom primers containing the P5 adapter sequence (pink) as well as an index sequence (purple) were designed to anneal to the RE of the transposon (beige) were paired with a standard primer containing a P7 adapter (orange) and an index sequence (dark purple) which anneals to the standard sequencing primer binding site (blue) in a low cycle PCR. (5) This TE-enriched sequencing library is then sequenced on a MiSeq using a custom sequencing primer that anneals to the RE. (b ) Genome-wide distribution of Tn-seq reads, measured in precent reads, from ACE transfer experiments of 10-kb, 50-kb and 100-kb Syn100 cargoes into TS1 (purple bars), TS2 (blue bars) and TS3 (pink bars). Locations of each target site are given by triangles of the appropriate color. Genome coordinates are plotted with the origin of replication ( oriC ) as the zeroth coordinate. (c ) Integration orientation for ACE transfer experiments of 10-kb, 50-kb and 100-kb Syn100 cargoes into TS1 (purple), TS2 (blue) and TS3 (pink) given in percent Tn-seq reads. RL integration is given in blue and LR integration is given in light blue. (d ) Genome-wide distribution of off-target Tn-seq reads for ACE transfer experiments of 100-kb Syn100 cargo into TS1 (purple circles), TS2 (blue circles) and TS3 (pink circles). Frequency of off-target integration is given as a read fraction normalized to the most frequent off-target integration position. The most frequent off-target integration position for each of the TS1-3 experiments is additionally labeled with the percent reads in the Tn-seq mapping to said position. Genome coordinates are plotted with the origin of replication ( oriC ) as the zeroth coordinate. (e ) Diagram illustrating the variants of the pAra-CAST plasmids used in 100-kb Syn100 cargo transfers and corresponding efficiency of ACE transfer with each variant, measured in GFP+ c.f.u. Data is shown as the mean ± s.d. for n = 3 biologically independent samples. (f ) Genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-crRNA NT . Frequency of integration is given as a read fraction normalized to the most frequent integration position. The most frequent integration position is additionally labeled with the percent reads in the Tn-seq mapping to said position. Genome coordinates are plotted with the origin of replication ( oriC ) as the zeroth coordinate. (g ) As in f but genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-ΔcrRNA. (h ) As in f but genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-Δcascade. (i ) As in f but genome-wide distribution of Tn-seq reads for ACE transfer of 100-kb Syn100 cargo with pAra-CAST-ΔQcascade.

Article Snippet: For library preparation, Nextera DNA Flex Library Prep Kit (Illumina) was used per manufacturer instructions to tag, barcode, amplify and add index primers (i5 and i7) to the library.

Techniques: DNA Extraction, Sequencing, Library Amplification, Binding Assay, Genome Wide, Labeling, Variant Assay

( a ) Diagram of 200-kb E. coli MDS42 transfer to V. natriegens . The MDS42 genome is depicted by the gray circle and the V. natriegens genomes are depicted by the purple circles, with chromosome 1 in dark purple and chromosome 2 in light purple. Sizes of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region in MDS42 is represented by the red portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the arrow. The wbfF gene of V. natriegens chromosome 1 is given by the pink rectangle, which is targeted by the CAST by the TS wbfF crRNA, shown as a pink triangle. The outcome chimeric genome is represented as an integration of the red segment of the MDS42 genome into the V. natriegens genome at wbfF . (b ) Genotyping colony PCR gels for four integrant colonies of the 200-kb MDS42 transfer into the V. natriegens wbfF . In the schematic above the gel, the gray rectangle represents the 200-kb MDS42 insert, the yellow boxes represent the LE and RE, and the pink rectangles represent the wbfF site. The integration site in wbfF targeted by crRNA wbfF is shown with a pink triangle. The right and left junctions for a RL integration are checked with primers specific to wbfF and the MDS42 segment, shown as blue and red arrows, respectively. An internal region of the MDS42 integration was also checked, shown with the gray arrows. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (c ) As in b but genotyping colony PCR for the four integrant colonies for the right and left junctions for a LR integration, represented with the blue and red arrow pairs, as well as for another internal region along the MDS42 segment given with the gray arrows. (d ) As in b but with an additional genotyping PCR check of a region within the integrated MDS42 segment in the wbfF site of V. natriegens . (e ) Genotyping colony PCR gels for two integrant colonies of the 1-Mb MDS42 transfer into the V. natriegens chromosome 1 dif . In the schematic above the gel, the gray rectangle represents the 1-Mb MDS42 insert, the yellow boxes represent the LE and RE, and the dark purple rectangles represent the chr. 1 dif site. The integration site is targeted by crRNA TS(C1) shown with a dark purple triangle. The right and left junctions for a RL integration are checked with primers specific to chr. 1 dif and the MDS42 segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (f ) As in c but genotyping colony PCR for the two integrant colonies for the right and left junctions for a LR integration, represented with the blue and red arrow pairs, as well as for an internal region along the MDS42 segment represented with the gray arrows. (g ) Genotyping colony PCR gels for two integrant colonies of the 1-Mb MDS42 transfer into the V. natriegens chromosome 2 dif . In the schematic above the gel, the gray rectangle represents the 1-Mb MDS42 insert, the yellow boxes represent the LE and RE, and the light purple rectangles represent the chr. 2 dif site. The integration site is targeted by crRNA TS(C2) shown with a light purple triangle. The right and left junctions for a RL integration are checked with primers specific to chr. 2 dif and the MDS42 segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (h ) Genotyping colony PCR gels assaying for an internal segment of the MDS42 transfer with a primer pair denoted by gray arrows priming within the MDS42 region. Features of the integration schematic are as in e . (i ) Diagram of 100-kb Syn100 transfer to Pseudomonas putida . The E. coli Syn100 genome is depicted by the gray circle and the P. putida genome is depicted by the green circle. Sizes of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region Syn100 is represented by the red portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the arrow. The glmS gene of P. putida is given by the orange rectangle, which is targeted by the CAST by the TS glmS crRNA, shown as an orange triangle. The outcome chimeric genome is represented as an integration of the red Syn100 segment into the P. putida genome at glmS . (j ) Genome-wide read coverages (in RPGC) for the P. putida KT2440 + 100-kb Syn100 genomic chimeric strain. The Syn100 segment is shaded in red, and P. putida genome is shaded in light green. Location of the TS glmS target is given by the orange triangle. (k ) Genotyping colony PCR gels for four integrant colonies of the 100-kb Syn100 transfer into the P. putida glmS . In the schematic above the gel, the red rectangle represents the 100-kb Syn100 insert, the yellow boxes represent the LE and RE, and the green duplex DNA represents the glmS site. The integration site in glmS targeted by crRNA glmS is shown with an orange triangle. The right and left junctions for a RL integration are checked with primers specific to glmS and the Syn100 segment, shown as blue and red arrows, respectively. An internal region of the Syn100 integration was also checked, shown with the gray arrows. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic.

Journal: bioRxiv

Article Title: Creation of genomic chimeras via megabase scale genome expansion

doi: 10.64898/2026.11.04.764350

Figure Lengend Snippet: ( a ) Diagram of 200-kb E. coli MDS42 transfer to V. natriegens . The MDS42 genome is depicted by the gray circle and the V. natriegens genomes are depicted by the purple circles, with chromosome 1 in dark purple and chromosome 2 in light purple. Sizes of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region in MDS42 is represented by the red portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the arrow. The wbfF gene of V. natriegens chromosome 1 is given by the pink rectangle, which is targeted by the CAST by the TS wbfF crRNA, shown as a pink triangle. The outcome chimeric genome is represented as an integration of the red segment of the MDS42 genome into the V. natriegens genome at wbfF . (b ) Genotyping colony PCR gels for four integrant colonies of the 200-kb MDS42 transfer into the V. natriegens wbfF . In the schematic above the gel, the gray rectangle represents the 200-kb MDS42 insert, the yellow boxes represent the LE and RE, and the pink rectangles represent the wbfF site. The integration site in wbfF targeted by crRNA wbfF is shown with a pink triangle. The right and left junctions for a RL integration are checked with primers specific to wbfF and the MDS42 segment, shown as blue and red arrows, respectively. An internal region of the MDS42 integration was also checked, shown with the gray arrows. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (c ) As in b but genotyping colony PCR for the four integrant colonies for the right and left junctions for a LR integration, represented with the blue and red arrow pairs, as well as for another internal region along the MDS42 segment given with the gray arrows. (d ) As in b but with an additional genotyping PCR check of a region within the integrated MDS42 segment in the wbfF site of V. natriegens . (e ) Genotyping colony PCR gels for two integrant colonies of the 1-Mb MDS42 transfer into the V. natriegens chromosome 1 dif . In the schematic above the gel, the gray rectangle represents the 1-Mb MDS42 insert, the yellow boxes represent the LE and RE, and the dark purple rectangles represent the chr. 1 dif site. The integration site is targeted by crRNA TS(C1) shown with a dark purple triangle. The right and left junctions for a RL integration are checked with primers specific to chr. 1 dif and the MDS42 segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (f ) As in c but genotyping colony PCR for the two integrant colonies for the right and left junctions for a LR integration, represented with the blue and red arrow pairs, as well as for an internal region along the MDS42 segment represented with the gray arrows. (g ) Genotyping colony PCR gels for two integrant colonies of the 1-Mb MDS42 transfer into the V. natriegens chromosome 2 dif . In the schematic above the gel, the gray rectangle represents the 1-Mb MDS42 insert, the yellow boxes represent the LE and RE, and the light purple rectangles represent the chr. 2 dif site. The integration site is targeted by crRNA TS(C2) shown with a light purple triangle. The right and left junctions for a RL integration are checked with primers specific to chr. 2 dif and the MDS42 segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (h ) Genotyping colony PCR gels assaying for an internal segment of the MDS42 transfer with a primer pair denoted by gray arrows priming within the MDS42 region. Features of the integration schematic are as in e . (i ) Diagram of 100-kb Syn100 transfer to Pseudomonas putida . The E. coli Syn100 genome is depicted by the gray circle and the P. putida genome is depicted by the green circle. Sizes of transferred region, recipient genome and chimeric genome are given in the schematic. The transferred region Syn100 is represented by the red portion of the circle flanked by TEs, shown as yellow rectangles. Transfer direction is shown by the arrow. The glmS gene of P. putida is given by the orange rectangle, which is targeted by the CAST by the TS glmS crRNA, shown as an orange triangle. The outcome chimeric genome is represented as an integration of the red Syn100 segment into the P. putida genome at glmS . (j ) Genome-wide read coverages (in RPGC) for the P. putida KT2440 + 100-kb Syn100 genomic chimeric strain. The Syn100 segment is shaded in red, and P. putida genome is shaded in light green. Location of the TS glmS target is given by the orange triangle. (k ) Genotyping colony PCR gels for four integrant colonies of the 100-kb Syn100 transfer into the P. putida glmS . In the schematic above the gel, the red rectangle represents the 100-kb Syn100 insert, the yellow boxes represent the LE and RE, and the green duplex DNA represents the glmS site. The integration site in glmS targeted by crRNA glmS is shown with an orange triangle. The right and left junctions for a RL integration are checked with primers specific to glmS and the Syn100 segment, shown as blue and red arrows, respectively. An internal region of the Syn100 integration was also checked, shown with the gray arrows. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic.

Article Snippet: For library preparation, Nextera DNA Flex Library Prep Kit (Illumina) was used per manufacturer instructions to tag, barcode, amplify and add index primers (i5 and i7) to the library.

Techniques: Genotyping, Genome Wide

( a ) Using PhiC31 recombinase to excise +2/2 selection and GFP markers from Cassette END of a dif integrated E. coli DH10B + 2-Mb Syn-seg. 1 genome chimera strain. The expression of PhiC31 in this strain triggers a crossing-over event between the attP and attB sequences flanking the selection and screening markers in Cassette END , leading to marker loss, and enabling subsequent ACE events in this chimeric strain as shown in . (b ) Assaying for Cassette END marker excision via genotyping colony PCR of dif integrated E. coli DH10B + 2-Mb seg. 1 cells before (+) and after (-) expression of PhiC31 recombinase. Chimeric cells before (+) and after (-) PhiC31 induction were also stamped onto selective LB agar containing either 200 μg/ml hygromycin (Hygro) or 2.5 mM 4-chlorophenylalanine (Cl-Phe). (c ) Genotyping colony PCR gels for eight integrant colonies of the 1-Mb S. flexneri transfer into the dif integrated E. coli DH10B + 2-Mb seg. 1. In the schematic above the gel, the blue rectangle represents the 1 Mb Shigella insert, the yellow boxes represent the LE and RE, and the red duplex DNA represents 2 Mb seg. 1 dif site. The integration site in dif targeted by crRNA TS(dif) is shown with a red triangle. The right and left junctions for a RL integration are checked with primers specific to dif and the Shigella segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (d ) Genotyping colony PCR gels for eight integrant colonies of the 1-Mb S. flexneri transfer into the dif integrated E. coli DH10B + 2-Mb Syn-seg. 1. In the schematic above the gel, the blue rectangle represents the 1 Mb Shigella insert, the yellow boxes represent the LE and RE, the red rectangles represent 2-Mb seg. 1 genomic stretches and the gray duplex DNA represents the DH10B dif site. The integration site in dif targeted by crRNA TS(dif) is shown with a gray triangle. The right and left junctions for a RL integration of 2-Mb seg. 1 at the DH10B dif are checked with primers specific to dif and the Syn61 segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (e ) Expression distribution of bulk Syn61 transcripts (pink), S. flexneri transcripts (blue) compared to bulk homologous DH10B transcripts (gray) in DH10B, S. flexneri , Syn61, Chimeric and Trimeric strains measured in log(TPM+1). Distributions are based on the data from n = 3 biologically independent samples. Edges of boxes close to zero represent outliers that are the result of bioinformatic and sequencing artifacts with no biological significance. (f ) Differential expression of 3-fold (blue), 2-fold redundant genes (red) and non-redundant genes (black) between the trimeric strain and the DH10B background strain. The log 2 of the ratio of the expression level of the 3-fold and 2-fold redundant genes in the trimeric strain to the expression level of their homolog in the DH10B strain (blue and red) is plotted alongside log 2 of the ratio of the expression level of non-redundant genes in the trimeric strain to the expression level of its homolog in the DH10B strain (black). Points are also plotted based on their –log 10 adjusted p-value. P-value cutoff was set at 0.001 and the log 2 fold-change cutoff was set to ±1 so that points below the cutoff are in gray. (g ) Semi-log plot of growth curves (optical density as a function of hours elapsed) for chimeric and trimeric genome bacteria as well as their wild-type precursors strains. E. coli DH10B is given by the blue curve, S. flexneri is given by the orange curve, E. coli Syn61 is given by the green curve, DH10B + 1-Mb Shigella is given by the red curve, DH10B + 1-Mb Syn61 is given by the purple curve, DH10B + 2-Mb Syn61 is given by the brown curve and DH10B + 2-Mb Syn61 + 1-Mb Shigella is given by the pink curve. Reported curves are the average of four independently grown biological replicates of each strain, with the solid curve representing the mean OD at each time point and the colored halo surrounding each curve representing +/-s.d. Note that optical density is plotted on a logarithmic scale, hence the semi-log plot. (h ) Doubling times for chimeric and trimeric genome bacteria as well as their wild-type precursor strains. Reported doubling time, shown as mean +/− s.d., are the average of four independently grown biological replicates of each strain. The doubling time reported for each individual experiment is represented by dots.

Journal: bioRxiv

Article Title: Creation of genomic chimeras via megabase scale genome expansion

doi: 10.64898/2026.11.04.764350

Figure Lengend Snippet: ( a ) Using PhiC31 recombinase to excise +2/2 selection and GFP markers from Cassette END of a dif integrated E. coli DH10B + 2-Mb Syn-seg. 1 genome chimera strain. The expression of PhiC31 in this strain triggers a crossing-over event between the attP and attB sequences flanking the selection and screening markers in Cassette END , leading to marker loss, and enabling subsequent ACE events in this chimeric strain as shown in . (b ) Assaying for Cassette END marker excision via genotyping colony PCR of dif integrated E. coli DH10B + 2-Mb seg. 1 cells before (+) and after (-) expression of PhiC31 recombinase. Chimeric cells before (+) and after (-) PhiC31 induction were also stamped onto selective LB agar containing either 200 μg/ml hygromycin (Hygro) or 2.5 mM 4-chlorophenylalanine (Cl-Phe). (c ) Genotyping colony PCR gels for eight integrant colonies of the 1-Mb S. flexneri transfer into the dif integrated E. coli DH10B + 2-Mb seg. 1. In the schematic above the gel, the blue rectangle represents the 1 Mb Shigella insert, the yellow boxes represent the LE and RE, and the red duplex DNA represents 2 Mb seg. 1 dif site. The integration site in dif targeted by crRNA TS(dif) is shown with a red triangle. The right and left junctions for a RL integration are checked with primers specific to dif and the Shigella segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (d ) Genotyping colony PCR gels for eight integrant colonies of the 1-Mb S. flexneri transfer into the dif integrated E. coli DH10B + 2-Mb Syn-seg. 1. In the schematic above the gel, the blue rectangle represents the 1 Mb Shigella insert, the yellow boxes represent the LE and RE, the red rectangles represent 2-Mb seg. 1 genomic stretches and the gray duplex DNA represents the DH10B dif site. The integration site in dif targeted by crRNA TS(dif) is shown with a gray triangle. The right and left junctions for a RL integration of 2-Mb seg. 1 at the DH10B dif are checked with primers specific to dif and the Syn61 segment, shown as blue and red arrows, respectively. D and R denote donor and recipient controls in each assay. Lengths of each PCR product are shown above each set of arrows in the schematic. (e ) Expression distribution of bulk Syn61 transcripts (pink), S. flexneri transcripts (blue) compared to bulk homologous DH10B transcripts (gray) in DH10B, S. flexneri , Syn61, Chimeric and Trimeric strains measured in log(TPM+1). Distributions are based on the data from n = 3 biologically independent samples. Edges of boxes close to zero represent outliers that are the result of bioinformatic and sequencing artifacts with no biological significance. (f ) Differential expression of 3-fold (blue), 2-fold redundant genes (red) and non-redundant genes (black) between the trimeric strain and the DH10B background strain. The log 2 of the ratio of the expression level of the 3-fold and 2-fold redundant genes in the trimeric strain to the expression level of their homolog in the DH10B strain (blue and red) is plotted alongside log 2 of the ratio of the expression level of non-redundant genes in the trimeric strain to the expression level of its homolog in the DH10B strain (black). Points are also plotted based on their –log 10 adjusted p-value. P-value cutoff was set at 0.001 and the log 2 fold-change cutoff was set to ±1 so that points below the cutoff are in gray. (g ) Semi-log plot of growth curves (optical density as a function of hours elapsed) for chimeric and trimeric genome bacteria as well as their wild-type precursors strains. E. coli DH10B is given by the blue curve, S. flexneri is given by the orange curve, E. coli Syn61 is given by the green curve, DH10B + 1-Mb Shigella is given by the red curve, DH10B + 1-Mb Syn61 is given by the purple curve, DH10B + 2-Mb Syn61 is given by the brown curve and DH10B + 2-Mb Syn61 + 1-Mb Shigella is given by the pink curve. Reported curves are the average of four independently grown biological replicates of each strain, with the solid curve representing the mean OD at each time point and the colored halo surrounding each curve representing +/-s.d. Note that optical density is plotted on a logarithmic scale, hence the semi-log plot. (h ) Doubling times for chimeric and trimeric genome bacteria as well as their wild-type precursor strains. Reported doubling time, shown as mean +/− s.d., are the average of four independently grown biological replicates of each strain. The doubling time reported for each individual experiment is represented by dots.

Article Snippet: For library preparation, Nextera DNA Flex Library Prep Kit (Illumina) was used per manufacturer instructions to tag, barcode, amplify and add index primers (i5 and i7) to the library.

Techniques: Selection, Expressing, Screening, Marker, Genotyping, Sequencing, Quantitative Proteomics, Bacteria, Significance Assay